So I got a little more work done on the Halo 4 undersuit. Not a ton as my EVA foam came in so I started playing with the outter armor, but still worked on it a bit. Mainly I worked on drafting the underarmor’s elbow protection.
I based my elbow/lower-tricep pattern off of Mike Loh’s Spartan-IV undersuit pattern:
Fairly simple design that’ll be in several layers of black vinyl/leather. My pattern sketch:
I threw in some basic measurements in case anyone wants to try to duplicate what I did. Of course, this is sized to me so people will have to size up/down as needed. But this extends from the upper forearm to the lower tricep and wraps around the arm only slightly.
I also got in my fabric swatches. I think I’ve chosen my final stretchy fabric choices but still deciding on the mesh. The mesh sample I got from SpandexWorld is great in that it stretches but the whole are super tiny. I was hoping for something a little larger to imitate the honeycomb pattern on the Spartan-IV suits. Not sure if I’ll find a stretchy mesh with larger openings, but we’ll see.
This is amazing work by James_005 over at the 405th. A great front, back and side view of the Spartan-IV (Halo 4) undersuit.
Beautifully done. Probably not going to find a better look at the suit than this. It hits all the details from top to bottom.
Click here for the full-size/HD version.
Again, great work James.
Last few days I’ve been working on the Halo 4 underarmor suit pants, since I’m still waiting for foam and fabric swatches to come in.
I haven’t made many pants in the past and the ones I have had been for my historical fencing so they were baggy breaches and not form-fitting pants. So this was a little bit of an adventure and experiment but I think it turned out well.
So if we go back to our reference pictures we’ll notice that the Spartan-IV undersuit pants aren’t as much pants as they are tights. They hug the legs, much like the torso portion of the underamor does. So stretchy fabric is a must so we can get the right look and be able to move as well. Here’s couple of pictures for reference:
Now that I had my pictures at hand, I could start drafting a pattern & mock up.
Thanks for stumbling across this blog. I’m embarking on an attempt to build Halo 4 armor out of EVA foam and an undersuit to go along with it.
I’m on the 405th Forums as theTavernKnight. I give quick updates on how everything is going on there, but here I’ll get into more detail for people that want to really follow along and see how things are going.
To the left is roughly what I’m aiming at, though the shins and forearms might get tweaked depending on my mood. I’d love to do the Halo 4 recon helmet and torso. Currently, there’s no Pepakura files for those so I’ll wait to do those pieces last. If there’s no files made by the time I get that far I’ll have to try to do it from scratch which is a bit daunting, but not impossible.
I’m also working on an undersuit to go with this. Luckily, I have plenty of sewing experience so the undersuit won’t be too much of a problem except for the neck which I’m sure will be very much a trial & error deal so it’ll sit correctly and not slip down, yet is comfortable to wear. The undersuit will be made out of a mix of tool mesh, stretchy fabric and leather. More on this in a later post.
Also looking to create some foam weapons while I”m at it. On the roster is the Magnum, DMR and BR — my favorite loadouts. Maybe I’ll work on creating a glowing sticky while I’m at it for fun.
The fabric swatches have been ordered to finalize color/shade and material. A bunch of EVA foam sheets also ordered so I can start working on the armor once it comes in. And I’m off the the craft store to pick up some craft foam and other supplies.
That’s it for now. I’ve started drafting the undersuit pattern and worked on the torso mock up. I’ll do a post on that shortly.